4\8\12 Channel Receiver

receives wireless signals from YTL wireless sensors and switches and provide 4 or 8 or 12relay outputs.

The connection from the receiver to actuator (relay case) uses network Cat 5 cable. 4 or 8 or 12 lighting circuits can be controlled by the receiver. Multiple receiver scan form a control network using CAN-Bus system. Computers can also be connected to the control network to query information from the receivers or send control commands to them. In this way, a centralized control can be implemented. Receivers may be installed above ceiling or inside electricity distribution box. There are 2 buttons on a receiver, one is used to make the receiver go into learning mode, and the other is used to clean up the learned information. It has the following characteristics:

l   Each receiver has a separate microprocessor, is the most advanced distributed control system.

l   Various switching modes are supported, such as delay on/off

l   The receiver has various control logic built in.  Besides lights, it also can provide controls devices like curtain and HAVC.

1.1 Benefits

l   Easy installation, easy maintenance

l   Support various switching modes

l   Up to 4 or 8 or 12 outputs

l   Can self-learning IDs of YTL Wireless Sensors

l   Control various electric devices. Such as air-conditioning, lighting, curtain.

l   Support USB and Networking

1.2 Scope of Use

This product can be used in offices, hotels, schools, homes, factories, hospitals, municipal buildings, and other indoor places.

1.3 Parameters

l   Norm Conforming Assembly: Q/67218248-4.1-2009

l   Power Supply: 100VAC~265VAC, 50Hz/60Hz±1Hz

l   Frequency: 315MHz/868MHz

l   Operation Temperature: -10°C - 60°C

l   Storage Temperature: -20°C - 80°C

l   Humidity: ≤95%

l   Dimensions: 149mm x 90mm x 60mm

l   Output: 4 or 8 or 12 on/off outputs

l   Mechanical Data: Flame Retardant ABS

l   Protection Type: IP30

1.4 Points for Attention

l   The temperature of receiver is -10°C~60°C. Power AC100V~265V, 50Hz/60Hz; Use the product out of the scope may cause abnormal work or damage equipment.

l   The product is for indoor use only. Avoid dust, moisture, corrosion.

l   The product should be installed and used to the place that is non-shake, non-vibration. The position of antenna should far away from metal and other radio devices or devices generating electric noises

l   Avoid electric shock, non-professional people can’t unpack the receiver.

4\8\12 Channel Receiver