Chengdu YTL Technologies Ltd.
Main products:Receiver,Relay,Switch,Sensor
Products
Contact Us
  • Contact Person : Mr. Ho Peter
  • Company Name : Chengdu YTL Technologies Ltd.
  • Tel : 86-28-82007166
  • Address : Sichuan,Chengdu,8-2-2 No.1 International, Duoyuan Headquarters,Longtan Headquarter City.
  • Country/Region : China
  • Zip : 610052

868MHz 8 Channel Receiver

868MHz 8 Channel Receiver
Product Detailed
1.Easy installation, easy maintenance 2.Support various switching modes 3.Up to 8 outputs 4.Control various electric devices. 8 Channel ReceiverOverview

The 8 Channel Receiver receives wireless signals from YTL wireless sensors and switches and provide 8 relay outputs, which are grouped into 2 cases. The connection from the receiver to actuator(relay case) uses network Cat 5 cable. 8 lighting circuits can be controlled by the receiver. Multiple receiver scan form a control network using CAN-Bus system. Computers can also be connected to the control network to query information from the receivers or send control commands to them. In this way, a centralized control can be implemented. Receivers may be installed above ceiling or inside electricity distribution box. There are 2 buttons on a receiver, one is used to make the receiver go into learning mode, and the other is used to clean up the learned information. It has the following characteristics:

l   Each receiver has a separate microprocessor, is the most advanced distributed control system.

l   Various switching modes are supported, such as delay on/off

l   The receiver has various control logic built in. Besides lights, it also can provide controls devices like curtain and HAVC

Benefits

l   Easy installation, easy maintenance

l   Support various switching modes

l   Up to 8 outputs

l   Can self-learning IDs of YTL Wireless Sensors

l   Control various electric devices. Such as air-conditioning, lighting, curtain.

l   Support USB and Networking

Scope of Use

This product can be used in offices, hotels, schools, homes, factories, hospitals, municipal buildings, and other indoor places.

Parameters

l   Standards-compliant: Q/67218248-4.1-2009

l   Working Volt:AC 100V~265V,50Hz/60Hz

l   Working Frequency: 868.3MHz/315.0MHz

l   Output: 8 relay output.

l   Working Temperature: -10°C~60°C, Relative Humidity≤75%,

l   Dimensions: 149mm×90mm×60mm

l   Material: Fire-Retardant Material ABS

l   Protection Type IP30, only available for indoor.

l   Position of Installation: can be installed into electricity distribution box, external antenna may be connected (the length of antenna is 2.5m - 4m).

Points for Attention

l   The temperature of receiver is -10°C~60°C. Power AC100V~265V, 50Hz/60Hz; Use the product out of the scope may cause abnormal work or damage equipment.

l   The product is for indoor use only. Avoid dust, moisture, corrosion.

l   The product should be installed and used to the place that is non-shake, non-vibration. The position of antenna should far away from metal and other radio devices or devices generating electric noises

l   Avoid electric shock, non-professional people can’t unpack the receiver.

868MHz 8 Channel Receiver



Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.